Playing a CD in a car can be a delightful experience. It allows you to listen to a high-quality recording in a vehicle that is smaller and cheaper than a home entertainment system. You can listen to your favorite music or a speech that is a motivational boost. It can provide a lot of entertainment and an excellent way to relax.
However, CDs can be difficult to clean. If you don’t take the proper steps, then the CD will not be playable. This article provides you with some steps about how to clean a car Cd player.
Having a CD cleaner for your car can save you some money, but it’s probably not worth the $20-$30 cost. All you need is a good wash to make your car look brand new again!
To clean your auto CDs, you don’t need any particular skills or equipment. All you’ll need are these automotive cleaning supplies:
How to clean a car Cd player
- Water (preferably distilled water)
- A clean rag (cotton or microfiber, depending on which you prefer)
- Dishwashing soap (non-sudsing)
- Water-based clear plastic cleaner
- Interior protectant spray (optional).
Step 1: Take out your car and wash it! The best way to clean a car’s CD player is, to begin with, a clean surface – just like when dealing with any other dirt/grime issue in the interior of your vehicle, you need to give yourself a fighting chance by removing as much loose dirt/dust from the area before proceeding with the cleaning process.
Step 2: Grab your clean rag and pour some water on it. You don’t need to use a ton; make sure that the rag is wet enough to wipe away tiny particles of dirt/dust from the player. Don’t go overboard with the water as you do not want anything dripping into or pooling inside of your CD player’s mechanism – an excess of moisture can be fatal for this piece of equipment!
Read more : How to read ABS codes without a scanner
Step 3: Wipe off any loose particles from the unit and the cords leading to it (the power cord and auxiliary cord if present). As before, apply very little pressure so as not to aggravate the mechanism of the player.
Step 4: Pour some dishwashing soap onto another clean section of your rag and gently wipe away any dust/grime that’s left behind. If needed, you can apply a small amount of water again, but make sure it’s not much as this could cause problems for your car cd player.
Step 5: Pour a small amount of clear plastic cleaner onto a new section of rag – if your player’s made from wood or faux-wood material, then you’ll want to skip over this step as it might harm the finish/treatment on those pieces. Wipe enough cleaner onto the unit so that it covers all areas. Allow just a few minutes for the cleaner to perform its work.
Step 6: Take your clear plastic cleaner and apply more to your rag if necessary – now wipe away any excess and leave only the shine of the clear plastic. Use caution not to damage the player’s finish by applying too much pressure; if you’re using a microfiber towel, then you should be fine, but it never hurts to proceed with extra care!
Step 7 (optional): Grab out an interior protectant spray and mist it onto your car cd player to prevent further dust grime buildup. If you’re not interested in doing this, move on to the next step.
Step 8: Reinstall your player into the dash by plugging in all cords and putting it back in place. Replace any screws that were removed before (if applicable). Once done, enjoy your favorite tracks again!
Conclusion:
Thank you for reading this article on How To Clean A Car Cd Player. We hope you found this information useful! A clean cd player will make your next road trip much more enjoyable. With a bit of care and effort, you can ensure your car’s cd player will last many years. We recommend that you periodically remove the CDs, thoroughly clean the inside of your player, and gently wipe the outside of the player’s body.
